Stake Semi Trailer

Warehouse Stake trailer is a common mode of semi-trailer transport, shipping, courier companies in the indispensable means of transport.

Warehouse stake semi-trailer used to send simple goods such as vegetables, fruits, clothes, appliances, and other daily necessities. Power engineering, communication engineering also play a very large role. Small equipment for engineering, were transported by warehouse gate trailer.

Warehouse stake trailer should pay attention to what matters

Note angle blind spot inwardly when no pedestrians, especially riding a car battery, silent suddenly appeared. Tires before travel, be sure to check out well.

When reversing the direction is reversed, slow slow, not too much.

If out vehicle inspection is a must to check include: vehicle axle screws, drive screws, Horn, lights, tire pressure. These places is more an accident is what time.

Take care not to move the steering wheel, because the body is long, with rollover may occur; turning more to try to play the extra space.

Do not use "from the rear brake first" approach for brake friction. Although doing so can reduce the impact on the engine when the brake, but might be dangerous, but once the habit is worse.

New trailer, during the run-in period, should always check brake oil, coolant, battery electrolyte is sufficient, found lack time to add. Of the company after the specified mileage, vehicles from the first check in time to the service station maintenance, oil change, filter, etc, and overhaul the chassis system.

Car Carrier Trailer

Car Carrier Trailer

1, Car carrier trailer's body has bars, cabinet structure, structure of light, light weight, mostly for two platforms, platform with hydraulic cylinders open, wire rope pulley structure, stable lifting height position and so on.

2, structural lightness: vehicle using truss structure, bearing the framework without the longitudinal beams of the trailer, light weight, light weight than similar cars around 30%.

3, safe and convenient operation: all loading and unloading platform lifting control reliability in operation, can be seen clearly, accurate operation.

4, the suspension system: under a unique leaf spring type suspension system, variable cross-section leaf spring, good ride comfort.

We Exported 60 units of Beiben Concrete Mixer Truck

• On April 7,We had a large number of export products-60 exit BEIBEN Concrete mixer Truck shipments to the Middle East.
  60 units of 16 cubic Beiben concrete mixer truck were made up at March after received the export orders.Our company unity,under hard work, in collaboration with other departments, the quality and quantity of finished production orders, sailing schedule shipping vehicles according to regulations, by the exporter's praise and affirmation.

Construction elevators

• Construction lifts, also known as the construction elevator, construction elevators generally refers to pedestrians or building materials in construction site vertical transport of goods transport. At present, the building lifts a total of more than 8 million cars globally, is the contemporary construction industry using most vertical goods transportation.
  Ancient China and European countries have to winch tools such as vertical transport of people and goods. Modern elevators is a product of the 19th century after the invention of the steam engine. In 1845, the birth of the first hydraulic lifts, be regarded as the prototype for building elevators. In 1853, Americans ài lì shā · ào dí sī (Elisha Otis) invented automatic safety devices, greatly improving cable traction lift safety. Architectural aspects of their use with the development of China's construction industry has been widely accepted and high-speed development. Original elevator is driven by the steam engine, so use the construction site must be installed in the boiler room. In 1880, the German Siemens invented electric lifts from this veritable architectural lift official appearance.
  First in the use of elevators in the building industry city in China is Shanghai. 1907, is located in public concession within of six layer high of hotel built first using has building lifts; Taiwan first of commercial lifts is appeared yú day rule period in the of 1932, that same year opening of Taipei City Chrysanthemum Yuan department store, and Tainan City Forest Department store are has device, shí said flow cage (Taiwanese language: Liû-lông), and forest department store has specifies for history building, its lifts has still save.

Application of Building Elevators

• Building elevator also known as freight lift, generally larger than the passenger lifts and loads more, ranging from 2000 to 5000 kg, most are based on traction. Freight lifts are generally not very good decoration, to avoid the shipment was damaged, many with manual control of the lift door switch.
  There is a very small freight elevator, in English called dumb waiter, specifically for multi-layer used to transport food, cups and plates in the restaurant. Such debris lifts will also be used to transport in multilayer library books.
  In places such as construction sites, warehouses will sometimes use rack and pinion mesh type elevators to transport goods and workers to use. The lift not lift shafts, use the rack support and move the car.
  
  
  A transport structure
  Traction type
  Multiple cables, hanging in the cabin lift shafts on the sheave room at the top. Steel cable suspension balance on the other end. General car plus 50% load is the weight. When the car moves, will move in opposite directions. Sheave is relying on the rough surface of the cables and friction between the grooves on the wheel to drive the car. So when the steel cable or sheave becomes old and must be replaced in due course to prevent skidding. Motor responsible for the driven sheave rotation, powered up or put down the car. Motor may be communication, there may be direct current. Partial motors using gears drive sheave, the newer and faster lifts typically using gearless drive. Some senior haulage type elevator weight compensation: under the car and counterweight is provided with a cable or chain, connect to ground. Role is to compensate for the flying car or counterweight cable length weight variation caused by change. Haulage type elevator will have a variety of safety devices to prevent the car due to cable breakage, for any reason, such as the degradation caused by brake failure. Minimum safety equipment including: installation of cables in the engine room the speed limiter, install safety gear in the car and counterweight. Safety gear is invented by Otis when the mechanical safety devices, automatically when accelerating to a speed clamp Rails, Park the car or counterweight brake. At the bottom of lift shafts, will be equipped with buffers, as the last protection.
  Traction lifts generally need to be set on top of the shaft machine room. Designed a new type of haulage type elevator, cable and Fibre-composite cable, can reduce the amount of lubrication and maintenance. In addition new motor small in size, can be installed in the leading axle or shaft, eliminating the room settings, called the elevator without machine room. Roomless lift is operated by Finland Kone elevators in 1996 research and development.
  Hydraulic
  Car supported by the bottom or side of the plunger up and down, piston driven by hydraulic pressure. Folding parts plunger can be used as a telescope, reducing the needed depth at the end of it. Parts plunger cannot be folded, subterranean installation must dig a hole. Because of restrictions on piston, hydraulic lift is generally only used in 2 to 5 storeys high building (not more than 20 metres). Advantages of hydraulic elevators is the engine room can be set in any position (can't leave the car too far, of course), and occupies less machinery is relatively easy; general use problems there is less chance of happening. But also have a large power, low speed faults, not higher than 1 meter per second, and emits heat when running. Therefore, computer room air conditioners must be used to cool down, otherwise the lift's lousy, even shut down due to overheating.
  Pneumatic
  Car in air-tight lift channel, differential pressure control, come to run the function. Commonly used for letters passing instruments, also in passenger lift designed to appear in the near future. This type of elevator lift saves cable and plunger, and have air-tight structure, syringe push a car, run to lift the top road and at the end. Car more streamlined structure, tunnels at the bottom does not need to be present.
  With currently available see pneumatic elevator. Have the following characteristics: lower emissions and take the weight directly affects elevator speed. Loading capacity will directly affect the intensity of the lifting gas-tight structure, like cable traction and hydraulic plunger usually carry a higher weight. Dray is different, if there's electricity in the operation, can be borrowed by gravity and natural intake fell to the bottom floor. Uplink using atmospheric pressure to improve car; down uses gravity to drop. Compressibility than oil and cables clear of air, took the elevator feel up and down in the past, in a pneumatic driven elevator are obvious.
  Elevator door lift door is two-tier. Within a layer of the gate is mounted on the car, commonly known as a car door. Switch machines installed on top of the car-driver car door, called the door. Outside a door is mounted on the lift shafts on each floor entrance, commonly known as the door (or door), which passed by the car door, close the door opener driven. Door springs (or hammer) is held in the closed state, prevent someone from falling into the hole. Interior doors with sensors (with reference to mechanical or light curtains-safety edge), sensors there are two kinds of mechanical and optical, prevents the extrusion to people or goods. Fold in the form of points and two doors from free pair folded, if specifically requested, or 30 percent.
  Early lifts the gate does not open automatically, car may only have spark. Exterior door it is possible is to manually pull open the door. In the new national standard GB7588, this category is called easy-lift, has been declining, is said not to do a (County).
  Not all lifts are horizontal (left/right) switches, there are vertical (up and down) design Folio, more common in old factory buildings inside a large freight elevator or multiple restaurants "dumb waiters".

Characteristics of concrete mixing station

• Concrete mixing station is composed of mixers, material weighing systems, material handling systems, material storage system, control system composed of five major systems and other ancillary facilities of the building material manufacturing equipment, its main principle is to work to cement for cementing material, mixing the raw materials such as sand, lime and cinder, finally making concrete, as input to construct a production of wall materials. Since its use of concrete mixing station, playing an important role in China's building materials industry has been, of course, this is the superior characteristic of concrete mixing station itself decided.
  Material consists of sand and gravel to concrete mixing station, powder feeding, water and admixtures feeding, transmission stirring, and stored into four parts, equipment glad shock had coursed through the whole steel casting, high quality h-not only look elegant, also strengthened the overall structural strength of concrete mixing station, installation convenience, complex terrain can be used in a variety of structures.
  Concrete mixing plant has excellent mixing performance of device using spiral double-horizontal-shaft forced type concrete mixer, Mixer not only strong in the dry and hard, plastic as well as a variety of ratios were able to achieve good mixing effect of concrete. And toss, high efficiency.
  concrete mixing station not only has an excellent mixer of concrete mixing station, it also has a variety of sophisticated accessories, such as screw conveyors, metering sensors, pneumatic components, these components in the operation of concrete mixing station in a high degree of reliability, and precise measurement skills and long service life. Meanwhile, repair and maintenance of concrete mixing station sites are equipped with deck or check the ladder, and with enough manipulation of space, and mixers can be equipped with automatic cleaning system for high voltage, with features to fuel and automatic over-temperature alarm function for easy maintenance.
  Have good environmental performance of concrete mixing station in machine operation and powder manipulation are within the full blockade systems, tank adopts high efficiency dust/mist spray methods greatly reduces environmental pollution by dust and concrete mixing plants of pneumatic system venting and unloading equipment used muffling device effectively reduces noise pollution.

Considerations for concrete placing boom

• After the completion of concrete placement,concrete placing boom must use products and clean water will clean the pump tube, each time pumping water when cleaning, spray balls must use scales should not be used instead of other objects, after cleaning, lifting weight, hanging fabric shaft after work to the next location, once it is installed, into the stack, repeating previous work.
  concrete placing boom are not allowed to take a long, take a long, in addition of fixed radius greater than promised work required support.
  Outlet when changing the position, wrapped in a burlap sack will be exported, avoiding concrete falling on the ground, to another position and then unlock.
  Prepare concrete placement of signal cables and radio, dual controls, columns, walls, concrete pouring, it make sure the lamp is pump stop, halt State stopped pouring required advance 4S stopped, turn off the light at the front desk, communication must assign, nighttime construction, control must match on flashlights, see concrete level.
  Test control concrete outlet with rope, and lever arm bent in the Middle split, running at its maximum effective range for a week.
  Concrete pump pipe, at the time of taking over, it is necessary to fully check that the tubing is cleaned, an interface must use rubber gaskets. Concrete pump tube should be checked after tightening.
  Four-foot boom with mooring rope fixed mooring rope should not be too tight, mechanical deformation of the interval should be left out of the boom.
  Material pole mounted on the frame to the legs with a tube of compaction, can be installed on the floor goes.
  Placing boom and counterweight, asked the boom among the necessary beats 200~300mm, upholstery sleeper or wooden foot surface, check whether the cloths Rod shaft vertical.
  Erection of boom position frame and check acceptance, calculating bearing capacity of parts of the body, double buckle securing, Foundation of stable situations.
  Inspection boom tighten all bolts, hinges are normal.
  concrete placing boom is straight and see if it is in the case of no counterweight is straight. (Boom under normal circumstances consider as not counterweight can be straight, because when the lifting boom, General tower crane boom and counterweight cannot be lifted, lifted up again and have to install).

Concrete mixer truck's new rules

• This year's initial, China vehicle service centers issued a "specification for concrete mixer truck of the announcement of the management requirements of the notice" requirement to curb unhealthy development of the concrete mixer truck market at present. In recent years, domestic manufacturers producing tank capacity is growing in volume, in today's market, the 6x4 chassis do 12 Parties have fairly widespread; 8x4 chassis has 16 or even more be done, the overload of the concrete mixer truck driving in the city every day, concrete tanks have increased the height of Center of gravity of the vehicle, truck rollover caused casualties of traffic accidents occur frequently.Various automobile manufacturers and testing bodies in order to further standardize the management of the announcement of concrete mixer truck, through research, and agreed to consult the Ministry of industrial policy Division, now the concrete mixer truck management requires notification of the announcement are as follows: 1. in the regulatory requirements, technical requirements for truck-mounted concrete mixer, add the following three points:(1) concrete mixer truck should conform to the requirements in the following table: two-axle tank car volume cannot be greater than 8, three-axle vehicle tank compartments shall not exceed 12 square, four-axle cars of tank volume cannot be greater than 16.(2) the concrete mixer truck's mixing drum fill rate should be not less than 51.5% (fill rate definition: mixing stirring volume and geometric volume ratio, expressed as a percentage). (3) the stirring capacity of concrete mixer truck shall meet the following requirements: stirring capacity Max load (kg)/density of the concrete (kg/m3) x110% Note: the concrete density recommended by GB/t 26408-2011 of the truck-mounted concrete mixer 2400kg/M3. 2. to declare the administrative requirements of parameters: (1) the original notice in the parameters bar of "volume" parameter is corrected to "stirring volume" parameter, stirring capacity according to the definition of the truck-mounted concrete mixer GB/T 26408-2011. (2) in record parameter in the increased tank body geometry capacity, and tank body installation dip parameter, and stirred capacity and tank body structure diagrams, diagrams content should including tank body size (as tank total length, and tank body maximum od, and into material mouth diameter,), and tank body material (refers to contact media of material, including aluminum, and stainless steel, and carbon steel, and non-metallic,), and tank body wall thick, and tank body stirred capacity calculation process. 3. starting from 269 batches of notices, should the relevant manufacturers and testing bodies in accordance with the requirements for reporting and testing of new products. 4. in the notice does not comply with the technical requirements of the relevant product, the relevant manufacturer should be on notice of the rectification before July 1, 2015, will suspend fails to meet the requirements of the product announcement.From the data listed in the table above you can clearly see that if the new rules were to be implemented, then mainstream large concrete mixer truck on the market today will be the end, overload will be contained. But the current situation of domestic policy measures on, want to truck mixer market back to norm, also takes a long time to remedy.
  

Tanzania planned for 14.2 billion dollars within five years the new railway network

• Tanzania planned for 14.2 billion dollars within five years the new railway network
  According to the Tanzanian Transport Minister sāi miù ěr · xī tǎ introduced, the Government of Tanzania plans within the next five years to invest 14.2 billion US dollars building a new railway network. SITA noted that the new railway will not only meet domestic transportation requirements, you can also access the goods to neighbouring landlocked countries such as Congo, Rwanda, Burundi and Uganda, the Democratic Republic of the transport. The project involves investment of 7.6 billion dollars and 2 connections at the port of Dar es Salaam and in Rwanda and Burundi of 561 km long standard gauge railway construction.
  In addition, two railway projects, including investment of 6.6 billion dollars of construction of the railway line, the railway line connecting Northern and southern parts of the country in Dar es Salaam and coal, iron ore and railway line of soda ash mining area. Project financing will be realized through more than 20-year loans from commercial banks.